Cory's 2005 Build

This was actually my first custom build, back in 2005.  Started off with a 4-up frame from Freddy Hernandez, and 93" S&S Shovelhead (get one!).  Trans is a rebuilt, genuine HD ratchet-top from the 70's.  Belt drive and clutch are from Primo...of course!  Tried to fabricate as many parts as I could: exhaust (stainless), handlebars, sissy bar, seat pan.  I welded up the stainless oil tank from a kit that FabKevin makes.  Fork legs were shaved on a lathe.  All chrome and polish work was done by the best in business, Meclec. 


The original tank and fender have been replaced with what you see here.  I hand made the gas tank from scratch, and the rear fender is from Front Street Cycle.  Yes, it's going to get painted.  I used ALOT of takeoff HD parts on the build...cheap AND reliable.  Late model forward controls with FabKevin adapters keep the foot position closer and higher than the typical stretched-out riding position that most dipsticks go for.  Laced and trued the wheels myself - front wheel is a 21", and rear is an 18" 200mm.  Remember, anything bigger than a 200, and you're probably a queer.
Cory - www.maindrivecycle.com